EasyPact TVS thermal overload relay LRE485 174...279A

Wishlist
Compare
Send
- VK
- WhatsApp
- Odnoklassniki
- Copy link

Model: 004.030.094

Manufacturer: Schneider Electric

Barcode: 3606480325359

EasyPact TVS thermal overload relay LRE485 with possible I_max calibration 174...279A and class 10A is designed to protect AC circuits and motors against:

overloads
phase failure
long starting time
prolonged stalled rotor condition

The thermal relay controls permanently the current driven by the motor. When this current exceeds the setting it's auxiliary contacts will change state, causing the motor to stop.

☎ Price by call

Specifications

Power circuit characteristics
Tripping class	10A (standard IEC 60947-4-1 specifies a tripping time for 7.2 times the setting current I_r: class 10 A: between 2 and 10 seconds)
Rated insulation voltage	690V
Rated impulse withstand voltage (U_imp)	6kV
Frequency limits of the operating current	50...60Hz
Setting range	174...279A
Fuses to be used with relay	aM - 315A gG - 315A
Compatible with contactor	LC1E200 LC1E250 LC1E300 LC1E400 LC1E500 LC1E630
Power circuit connection by bars or lugs
Pitch (without spreaders)	48mm
Bars or cables with lugs (cross-section)	4x25mm
Screws	M10
Tightening torque	35N·m
Auxiliary contact characteristics
Conventional thermal current	5A
Max sealed consumption of the operating coils of controlled contactors	0.72A/500VAC
Protection against short-circuits by gG or by GB2	5A
Connection by screw clamp terminals	2х1...2,5mm² - flexible cable without cable end 2х1...2,5mm² - flexible cable with cable end 2х1...2,5mm² - solid cable without cable end
Tightening torque	1,7N·m
Environment
Degree of protection	IP00
Protective treatment	"TH"
Storage temperature	-60°C...+80°C
Normal operation temperature without derating	-20°C...+60°C
Operation temperature with derating	-20°C...+70°C
Operating position	any
Flame resistance	850°C
Shock resistance	6gn - 11ms
Vibration resistance	3gn
Dielectric strength at 50Hz	6kV
Operating characteristics
Temperature compensation	-20°C...+60°C
Tripping threshold	1,14±0,06 I_r A
Sensitivity to phase failure	tripping current 130% of I_r on two phase, the last one at 0

Electrical diagram

EasyPact TVS thermal overload relays
[1.14 Mb]