Solid state relay 77.01.8.230.8051

Wishlist
Compare
Send
- VK
- WhatsApp
- Odnoklassniki
- Copy link

Model: 005.066.142

Manufacturer: Finder (Italy)

Modular solid state relay 77.01.8.230.8051 is used for finer control requiring short operate time (specially motor control), 3-phase general purpose, and also where AC input phase is different from AC output phase.
• 1 normally open contact (1NO) for 5A;
• Random switch-on;
• 35mm DIN rail mount.

$49.57

Characteristics

Output specification
Output configuration	1 NO (SPST-NO)
Rated current I_n/ Max peak current (10ms)	5А/300А
Rated voltage	230V АС
Rated voltage range	(60...240)V АС
Switching voltage range	(48...265)V АС
Repetitive peak off-state voltage	800V
Rated load АС7а (cos φ= 0.8)	5A
Rated load АС15	3А
Single phase motor rating (230V АС)	0.37kW
230V lamps rating	incandescent/halogen - 800W compact fluorescent (CFL)/led - 400W electronic ballast fluorescent tubes - 800W electromagnetic ballast compensated fluorescent tubes - 250W
Min switching current at 230V AC	100 mA
Typical off-state leakage current at 230V mA	1 mA
Max on-state voltage drop at t=25°C and 5А/100mА	0,85V/1,5V
Power loss at 5А	4W
Input specification
Nominal voltage U_n	230V AC
Rated power	АС (50 Hz) - 3.6VA DC - 0.3W
Operating range	(90...265)V AC
Must drop-out voltage, АС/DC	24V
Technical data
Electrical life	10·10⁶ cycles
Operate/release time	9/8 ms
Insulation between input and output (1,2/50 μs)	5kV
Dielectric strength	2500V АС
Ambient temperature	-20°C...+70°C
Protection category	IP20
Terminals
Screw torque	0,8 N·m
Max solid cable size	1x6/2x4 mm² 1x10/2x12 AWG
Max stranded cable size	1х4/2х2,5 mm² 1х12/2х14 AWG
Wire strip length	9 mm

Output specification

Output RMS current vs ambient temperature at 265V DC

Output RMS current vs ambient temperature for relay 77.01.8.230.8051

Inrush peak current vs inrush time

Dimensions and simplified circuit diagram

77 series solid state relays
[2.06 Mb]