Solid state relay 77.01.0.024.8050

  • Model: 005.066.141
  • photo 3
  • photo 4
Solid state relay 77.01.0.024.8050
Manufacturer: Finder (Italy)
Modular solid state relay 77.01.0.024.8050 is applicable for lamp inrush current reduction (CFL - Compact Fluorescent energy-saving Lamps and similar), heater control and soldenoid, contactor driver.
• 1 normally open contact (1NO) for 5A;
• Zero-crossing switch-on;
• 35mm DIN rail mount.

Characteristics

Output specification
Output configuration1 NO (SPST-NO)
Rated current In/ Max peak current (10ms)5А/300А
Rated voltage230V АС
Rated voltage range(60...240)V АС
Switching voltage range(48...265)V АС
Repetitive peak off-state voltage800V
Rated load АС7а (cos φ= 0.8)5A
Rated load АС15
Single phase motor rating (230V АС)
230V lamps ratingincandescent/halogen1000W
compact fluorescent (CFL)/led800W
electronic ballast fluorescent tubes1000W
electromagnetic ballast compensated fluorescent tubes500W
Min switching current at 230V AC100 mA
Typical off-state leakage current at 230V mA1 mA
Max on-state voltage drop at t=25°C and 5А/100mА0,85V/1,5V
Power loss at 5А4W
Input specification
Nominal voltage UnАС (50 Hz)24V
DC(12...24)V
Rated powerАС (50 Hz)0,6VA
DC0,5W
Operating rangeАС (50 Hz)(16...32)V
DC(9,8...32)V
Must drop-out voltage, АС/DC2,4V
Technical data
Electrical life10·106 cycles
Operate/release time20/12 ms
Insulation between input and output (1,2/50 μs)5kV
Dielectric strength2500V АС
Ambient temperature-20°C...+70°C
Protection categoryIP20
Terminals
Screw torque0,8 N·m
Max solid cable sizemm21x6/2x4
AWG1x10/2x12
Max stranded cable sizemm21х4/2х2,5
AWG1х12/2х14
Wire strip length9 mm

Output specification

Output RMS current vs ambient temperature at 32V DC
Output RMS current vs ambient temperature for relay 77.01.0.024.8050
Inrush peak current vs inrush time
Inrush peak current vs inrush time for relay 77.01.0.024.8050

Dimensions and simplified circuit diagram

Dimensions and simplified circuit diagram
Questions
WhatsAppTelegramViberVKemail