Relay RPM42JD

Model: 005.006.084

Manufacturer: Schneider Electric

Barcode: 3389119402262

Electromagnetic plug-in relay, 4 changeover contacts. Control circuit voltage 12Vdc. With LED indicator.

☎ Price by call

Main

range of product	Harmony Electromechanical Relays
series name	Power
product or component type	Plug-in relay
device short name	RPM
contacts type and composition	4 C/O
[Uc] control circuit voltage	12 V DC
[Ithe] conventional enclosed thermal current	15 A at -40…55 °C
status LED	With
control type	Lockable test button
utilisation coefficient	20 %

shape of pin	Flat
[Ui] rated insulation voltage	250 V conforming to IEC 300 V conforming to CSA 300 V conforming to UL
[Uimp] rated impulse withstand voltage	4 kV during 1.2/50 µs
contacts material	AgNi
[Ie] rated operational current	15 A at 277 V (AC) conforming to UL 15 A at 28 V (DC) conforming to UL 15 A at 250 V (AC) NO conforming to IEC 15 A at 28 V (DC) NO conforming to IEC 7.5 A at 250 V (AC) NC conforming to IEC 7.5 A at 28 V (DC) NC conforming to IEC
maximum switching voltage	250 V conforming to IEC
Resistive load current	15 A at 250 V AC 15 A at 28 V DC
maximum switching capacity	3750 VA 420 W
minimum switching capacity	170 mW at 10 mA, 17 V
operating rate	≤ 1200 cycles/hour under load ≤ 18000 cycles/hour no-load
mechanical durability	10000000 cycles
electrical durability	100000 cycles for resistive load
Average coil consumption	1.6 W
drop-out voltage threshold	>= 0.1 Uc DC
Operate time	20 ms at nominal voltage
Release time	20 ms at nominal voltage
Average coil resistance	75.8 Ohm at 20 °C +/- 10 %
rated operational voltage limits	9.6...13.2 V DC
protection category	RT I
test levels	Level A group mounting
operating position	Any position
pollution degree	3
safety reliability data	B10d = 100000
net weight	0.071 kg
device presentation	Complete product

dielectric strength	1500 V AC between contacts with micro disconnection 2000 V AC between coil and contact with reinforced 2000 V AC between poles with basic
standards	CSA C22.2 No 14 EN/IEC 61810-1 UL 508
product certifications	EAC CSA UL
ambient air temperature for storage	-40…85 °C
ambient air temperature for operation	-40…55 °C
vibration resistance	3 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles in operation 5 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles not operating
Degree of protection (Housing only)	IP40 conforming to EN/IEC 60529
shock resistance	15 gn for in operation 30 gn for not operating

RPZF4