Output data |
---|
Nominal output voltage | 24VDC ±1% |
Setting range of the output voltage | 18VDC...29,5VDC |
Output current | 5А (-25°C...+60°C, Uout=24VDC) 7,5А (with Power Boost, -25°C...+40°C, permanently, Uout=24VDC) 30A (SFB technology, 12ms) 7,5А (Uin≥ 100VАС) |
Derating | 60°C...70°C (2,5% / K) |
Connection in parallel | yes, for redundancy and increased capacity |
Connection in series | yes |
Control deviation | < 1% (change in load, static 10%...90%) < 2% (change in load, dynamic 10%...90%) < 0,1% (change in input voltage ±10%) |
Residual ripple | < 40 mVpp (with nominal values) |
Max power dissipation NO-load | 3W |
Max power loss nominal load | 15W |
Input data |
---|
Nominal input voltage range | 110VAC...240VAC |
Input voltage range | 85V...264V АС (50/60Hz) 90V...350V DC |
Short-term input voltage | 300VAC |
AC frequency range | 45Hz...65Hz |
Current consumption | 1,2А (120VAC) 0,6А (230VAC) |
Inrush surge current | < 15A (typical) |
Power failure bypass | > 55ms (120VAC) >55 ms (230VAC) |
Input fuse | 5А (slow-blow, internal) |
Choice of suitable fuses | 6А...16А (АС: characteristics B, C, D, K) |
Type of protection | transient surge protection |
Protective circuit/component | varistor |
Ganaral data |
---|
Dimensions (WxHxD) | 40 x 130 x 125 mm |
Efficiency (for 230VAC and nominal values) | > 90 % |
Insulation voltage input/output | 4 kVAC (type test) 2 kVAC (routine test) |
Protection class | I > 635000 h (40°C) |
Mounting position | horizontal DIN rail NS 35, EN 60715 |
Assembly instructions | alignable: 5 mm horizontally, 15 mm next to active components, 50 mm vertically |
Electromagnetic compatibility | conformance with EMC directive 2004/108/EC |
Surge voltage category | III |
DeviceNet approval | DeviceNetTM Power supply conformance tested |
Degree of protection | IP20 |
Ambient temperature (operation) | -25°C...+70°C |
Ambient temperature (storage/transport) | -40°C...+85°C |
Max permissible relative humidity (operation) | ≤ 95% (at 25°C, non-condensing) |
Connection data |
---|
Connection method | pluggable screw connection |
Solid conductor cross-section/AWG | 0,2...2,5mm2/20...12 |
Stranded conductor cross-section/AWG | 0,2...2,5mm2/20...12 |
Stripping length | 7 mm |
Screw thread | М3 |