| Main |
|---|
| range of product | Phaseo |
| product or component type | Power supply |
| power supply type | Regulated switch mode |
| input voltage | 100 … 120 V AC single phase, terminal(s): N-L1
200 … 500 V AC phase to phase, terminal(s): L1-L2 |
| output voltage | 24 V DC |
| rated power in W | 120 W |
| provided equipment | Power factor correction filter conforming to IEC 61000-3-2 |
| power supply output current | 5 A |
| output protection type | Against overload, protection technology: manual or automatic reset
Against overvoltage, protection technology: 30 … 32 V, manual reset
Against short-circuits, protection technology: manual or automatic reset
Against undervoltage, protection technology: tripping if U < 21.6 V
Thermal, protection technology: automatic reset |
| ambient air temperature for operation | 50 … 60 °C with
-25 … 50 °C without |
| Complementary |
|---|
| input voltage limits | 170 … 550 V
85 … 132 V |
| network frequency | 47 … 63 Hz |
| inrush current | 30 A for 2 ms |
| cos phi | 0.51 at 240 V
0.59 at 120 V |
| efficiency | 87 % |
| output voltage limits | 24 … 28.8 V adjustable |
| power dissipation in W | 15.5 W |
| line and load regulation | 1 … 3 % |
| holding time | ⩾ 120 ms at 400 V
⩾ 20 ms at 100 V
⩾ 40 ms at 240 V |
| permissible temporary current boost | 1.5 x In for 4 s |
| connections - terminals | Screw type terminals for input connection, connection capacity: 3 x 0.5 … 3 x 4 mm² AWG 22 … AWG 12
Screw type terminals for input ground connection, connection capacity: 1 x 0.5 … 1 x 4 mm² AWG 22 … AWG 12
Screw type terminals for output connection, connection capacity: 4 x 0.5 … 4 x 4 mm² AWG 22 … AWG 12
Screw type terminals for output ground connection, connection capacity: 1 x 0.5 … 1 x 4 mm² AWG 22 … AWG 12
Removable screw terminal block for diagnostic relay, connection capacity: 2 x 2.5 mm² |
| marking | CE |
| mounting support | 35 x 15 mm symmetrical DIN rail
35 x 7.5 mm symmetrical DIN rail |
| operating position | Vertical |
| operating altitude | 2000 m |
| output coupling | Parallel
Series |
| name of test | Harmonic current emission conforming to EN/IEC 61000-3-2
Conducted emissions on the power line conforming to EN 55022 Class B
Electrostatic discharges conforming to EN/IEC 61000-4-2
Induced electromagnetic field conforming to EN/IEC 61000-4-6
Magnetic field conforming to EN 61000-4-8
Primary outage conforming to IEC 61000-4-11
Radiated electromagnetic field conforming to EN/IEC 61000-4-3
Radiated emissions conforming to EN 55022 Class B
Rapid transient conforming to IEC 61000-4-4
Surge conforming to EN/IEC 61000-4-5 |
| status LED | 1 LED green for output voltage
1 LED orange for input voltage |
| depth | 125 mm |
| height | 143 mm |
| width | 56 mm |
| product weight | 0.7 kg |
| Environment |
|---|
| product certifications | CCSAus
UL
KC |
| standards | UL 508
CSA C22.2 No 60950-1 |
| environmental characteristic | EMC conforming to EN 61000-6-1
EMC conforming to EN 61000-6-3
EMC conforming to EN/IEC 61000-6-2
EMC conforming to EN/IEC 61000-6-4
EMC conforming to EN/IEC 61204-3
Safety conforming to EN/IEC 60950-1
Safety conforming to EN/IEC 61204-3
Safety conforming to SELV |
| IP degree of protection | IP20 conforming to EN/IEC 60529 |
| ambient air temperature for storage | -40 … 70 °C |
| relative humidity | 0 … 90 % during operation
0 … 95 % in storage |
| overvoltage category | Class I conforming to VDE 0106-1 |
| dielectric strength | Between input and ground
Between output and ground
Between input and output |
| MTBF reliability | 915000 H at 100 V AC with UTE C80-810 calculation method
950000 H at 200 … 500 V AC with UTE C80-810 calculation method |
