Contactor iCT A9C22813

Manufacturer: Schneider Electric

Barcode: 3606480088650

Contactor A9C22813 in iCT series is used in AC circuits for remote control under different systems.

Main

range of product	Acti9
product name	Acti9 iCT
product or component type	Contactor
device short name	ICT
device application	Motor-heating-lighting
Poles	3P
[Ie] rated operational current	16 A AC-7A 6 A AC-7B
pole contact composition	3 NO
network type	AC
control type	Remote control
[Uc] control circuit voltage	220...240 V AC 50 Hz

network frequency	50 Hz
[Ue] rated operational voltage	400 V AC 50 Hz
maximum power	1.6 W at 400 V AC
[Ui] rated insulation voltage	500 V AC 50/60 Hz
[Uimp] rated impulse withstand voltage	4 kV
control signal type	Maintained
switching frequency	100 switching operations/day
local signalling	Action indicator
hold-in power consumption in VA	4.6 VA
inrush power in VA	34 VA
mounting mode	Clip-on
mounting support	35 mm symmetrical DIN rail
9 mm pitches	4
height	81 mm
width	36 mm
depth	60 mm
colour	White
mechanical durability	1000000 cycles
electrical durability	100000 cycles IEC/EN 61095 16 A 50 Hz AC-7A 30000 cycles IEC/EN 61095 6 A 50 Hz AC-7B 30000 cycles IEC/EN 61095 50 Hz AC-7C 100000 cycles EN/IEC 60947-4-1 50 Hz AC-1 30000 cycles EN/IEC 60947-4-1 50 Hz AC-3 30000 cycles EN/IEC 60947-4-1 50 Hz AC-5a 30000 cycles EN/IEC 60947-4-1 50 Hz AC-5b
connections - terminals	Control circuit: tunnel type terminals2 cable(s) 1.5 mm² rigid Power circuit: tunnel type terminals1 cable(s) 1…4 mm² flexible Power circuit: tunnel type terminals1 cable(s) 1.5…6 mm² rigid Control circuit: tunnel type terminals1 cable(s) 1.5…2.5 mm² rigid Control circuit: tunnel type terminals2 cable(s) 1.5…2.5 mm² flexible
tightening torque	Control circuit: 0.8 N.m Power circuit: 0.8 N.m
product compatibility	IACTs
compatibility code	ICT
market segment	Residential Small commercial

standards	IEC/EN 61095
noise level	30 dB
heat dissipation	1.6 W
IP degree of protection	IP20
pollution degree	2
tropicalisation	2 conforming to EN 60947-4-1 2 conforming to EN 61095 2 conforming to IEC 1095
relative humidity	95 % at 55 °C
operating altitude	2000 m
ambient air temperature for operation	-5…60 °C
ambient air temperature for storage	-40…70 °C