TeSys D series contactor LC1D80E7

Wishlist
Compare
Send
- VK
- WhatsApp
- Odnoklassniki
- Copy link

Model: 004.001.102

Manufacturer: Schneider Electric

Barcode: 3389110440522

Control circuit voltage 48VAC 50/60Hz.
Rated operational current 80 A (АС-3).
Auxiliary contact composition 1 NO + 1 NC.

☎ Price by call

Main

range	TeSys
product name	TeSys D
product or component type	Contactor
device short name	LC1D
contactor application	Motor control Resistive load
utilisation category	AC-3 AC-1 AC-4
poles description	3P
power pole contact composition	3 NO
[Ue] rated operational voltage	Power circuit: ≤ 300 V DC 25...400 Hz Power circuit: ≤ 690 V AC
[Ie] rated operational current	125 A (at < 60 °C) at ≤ 440 V AC AC-1 for power circuit 80 A (at < 60 °C) at ≤ 440 V AC AC-3 for power circuit
motor power kW	22 kW at 220...230 V AC 50/60 Hz (AC-3) 37 kW at 380...400 V AC 50/60 Hz (AC-3) 45 kW at 415...440 V AC 50/60 Hz (AC-3) 55 kW at 500 V AC 50/60 Hz (AC-3) 45 kW at 660...690 V AC 50/60 Hz (AC-3) 45 kW at 1000 V AC 50/60 Hz (AC-3) 15 kW at 400 V AC 50/60 Hz (AC-4)
motor power HP (UL / CSA)	20 hp at 200/208 V AC 50/60 Hz for 3 phases motors 7.5 hp at 115 V AC 50/60 Hz for 1 phase motors 15 hp at 230/240 V AC 50/60 Hz for 1 phase motors 25 hp at 230/240 V AC 50/60 Hz for 3 phases motors 60 hp at 460/480 V AC 50/60 Hz for 3 phases motors 60 hp at 575/600 V AC 50/60 Hz for 3 phases motors
control circuit type	AC at 50/60 Hz
[Uc] control circuit voltage	48 V AC 50/60 Hz
auxiliary contact composition	1 NO + 1 NC
[Uimp] rated impulse withstand voltage	8 kV conforming to IEC 60947
overvoltage category	III
[Ith] conventional free air thermal current	10 A (at 60 °C) for signalling circuit 125 A (at 60 °C) for power circuit
Irms rated making capacity	140 A AC for signalling circuit conforming to IEC 60947-5-1 250 A DC for signalling circuit conforming to IEC 60947-5-1 1100 A at 440 V for power circuit conforming to IEC 60947
rated breaking capacity	1100 A at 440 V for power circuit conforming to IEC 60947
[Icw] rated short-time withstand current	640 A 40 °C - 10 s for power circuit 990 A 40 °C - 1 s for power circuit 135 A 40 °C - 10 min for power circuit 320 A 40 °C - 1 min for power circuit 100 A - 1 s for signalling circuit 120 A - 500 ms for signalling circuit 140 A - 100 ms for signalling circuit
associated fuse rating	10 A gG for signalling circuit conforming to IEC 60947-5-1 200 A gG at ≤ 690 V coordination type 1 for power circuit 160 A gG at ≤ 690 V coordination type 2 for power circuit
average impedance	0.8 mOhm - Ith 125 A 50 Hz for power circuit
[Ui] rated insulation voltage	Power circuit: 600 V CSA certified Power circuit: 600 V UL certified Power circuit: 1000 V conforming to IEC 60947-4-1 Signalling circuit: 690 V conforming to IEC 60947-1 Signalling circuit: 600 V CSA certified Signalling circuit: 600 V UL certified
electrical durability	0.8 Mcycles 125 A AC-1 at Ue ≤ 440 V 1.5 Mcycles 80 A AC-3 at Ue ≤ 440 V
power dissipation per pole	5.1 W AC-3 12.5 W AC-1
Front cover	With
mounting support	Plate Rail
standards	CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
product certifications	CSA BV UL GOST RINA CCC GL LROS (Lloyds register of shipping) DNV
connections - terminals	Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1…2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end Power circuit: connector 1 cable(s) 4…50 mm²flexible without cable end Power circuit: connector 2 cable(s) 4…25 mm²flexible without cable end Power circuit: connector 1 cable(s) 4…50 mm²flexible with cable end Power circuit: connector 2 cable(s) 4…16 mm²flexible with cable end Power circuit: connector 1 cable(s) 4…50 mm²solid without cable end Power circuit: connector 2 cable(s) 4…25 mm²solid without cable end
tightening torque	Control circuit: 1.2 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm Control circuit: 1.2 N.m - on screw clamp terminals - with screwdriver Philips No 2 Power circuit: 12 N.m - on connector - with screwdriver flat Ø 6 to Ø 8 mm Power circuit: 12 N.m - on connector hexagonal screw head 4 mm
operating time	20...35 ms closing 6...20 ms opening
safety reliability level	B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
mechanical durability	4 Mcycles
maximum operating rate	3600 cyc/h 60 °C

Complementary

coil technology	Without built-in suppressor module
control circuit voltage limits	0.85...1.1 Uc (-40…55 °C):operational AC 60 Hz 0.3...0.6 Uc (-40…70 °C):drop-out AC 50/60 Hz 0.8...1.1 Uc (-40…55 °C):operational AC 50 Hz 1...1.1 Uc (55…70 °C):operational AC 50/60 Hz
inrush power in VA	245 VA 60 Hz cos phi 0.75 (at 20 °C) 245 VA 50 Hz cos phi 0.75 (at 20 °C)
hold-in power consumption in VA	26 VA 60 Hz cos phi 0.3 (at 20 °C) 26 VA 50 Hz cos phi 0.3 (at 20 °C)
heat dissipation	6…10 W at 50/60 Hz
auxiliary contacts type	type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 type mirror contact 1 NC conforming to IEC 60947-4-1
signalling circuit frequency	25...400 Hz
minimum switching current	5 mA for signalling circuit
minimum switching voltage	17 V for signalling circuit
non-overlap time	1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
insulation resistance	> 10 MOhm for signalling circuit
contact compatibility	M11
compatibility code	LC1D
motor power range	55…100 kW at 480…500 V 3 phases 15…25 kW at 200…240 V 3 phases 30…50 kW at 380…440 V 3 phases 30…50 kW at 480…500 V 3 phases
motor starter type	Direct on-line contactor
contactor coil voltage	48 V AC standard

Environment

IP degree of protection	IP20 front face conforming to IEC 60529
protective treatment	TH conforming to IEC 60068-2-30
pollution degree	3
ambient air temperature for operation	-40…60 °C 60…70 °C with derating
ambient air temperature for storage	-60…80 °C
operating altitude	0...3000 m
fire resistance	850 °C conforming to IEC 60695-2-1
flame retardance	V1 conforming to UL 94
mechanical robustness	Vibrations contactor open: 2 Gn, 5...300 Hz Shocks contactor open: 8 Gn for 11 ms Vibrations contactor closed: 3 Gn, 5...300 Hz Shocks contactor closed: 10 Gn for 11 ms
height	127 mm
width	85 mm
depth	130 mm
net weight	1.59 kg

Dimensions and internal circuit

3-pole contactors LC1D with coil 48Vac 50/60Hz

Model	Rated operational voltage AC-3 (Ue ≤ 400V), A	Standard power ratings of 3-phase motors 50-60 Hz in category AC-3 (t≤60°C), kW
Model	Rated operational voltage AC-3 (Ue ≤ 400V), A	220V/230V	380V/400V	415V	440V	500V	660V/690V	1000V
LC1D09E7	9	2,2	4	4	4	5,5	5,5	-
LC1D12E7	12	3	5,5	5,5	5,5	7,5	7,5	-
LC1D18E7	18	4	7,5	9	9	10	10	-
LC1D25E7	25	5,5	11	11	11	15	15	-
LC1D32E7	32	7,5	15	15	15	18,5	18,5	-
LC1D38E7	38	9	18,5	18,5	18,5	18,5	18,5	-
LC1D40AE7	40	11	18,5	22	22	22	30	22
LC1D50AE7	50	15	22	25	30	30	33	30
LC1D65AE7	65	18,5	30	37	37	37	37	37
LC1D80E7	80	22	37	45	45	55	45	45
LC1D95E7	95	25	45	45	45	55	45	45
LC1D115E7	115	30	55	59	59	75	80	75
LC1D150E7	150	40	75	80	80	90	100	90

Standard control circuit voltages on 42Vac 50/60Hz

a.c. supply
Voltage, V	24	42	48	110	115	220	230	240	380	400	415	440	500
LC1-D09..D150 (D115 and D150 coils with integral suppression device fitted as standard)
50/60Hz	B7	D7	E7	F7	FE7	M7	P7	U7	Q7	V7	N7	R7	-
LC1-D40...D115
50Hz	B5	D5	E5	F5	FE5	M5	P5	U5	Q5	V5	N5	R5	S5
60Hz	B6	-	E6	F6	-	M6	-	U6	Q6	-	-	R6	-
d.c. supply
Voltage, V	12	24	36	48	60	72	110	125	220	250	440
LC1-D09...D38 (coils with integral suppression device fitted as standard)
U 0,7…1,25 Uc	JD	BD	CD	ED	ND	SD	FD	GD	MD	UD	RD
LC1-D40...D95
U 0,85…1,1 Uc	JD	BD	CD	ED	ND	SD	FD	GD	MD	UD	RD
U 0,75…1,2 Uc	JW	BW	CW	EW	-	SW	FW	-	MW	-	-
LC1-D115 and D150 (coils with integral suppression device fitted as standard)
U 0,75…1,2 Uc	-	BD	-	ED	ND	SD	FD	GD	MD	UD	RD
Low consumption
Volatage DC	5	12	20	24	48	110	220	250
LC1-D09..D38 (coils with integral suppression device fitted as standard)
U 0,7...1,25 Uc	AL	JL	ZL	BL	EL	FL	ML	UL