TeSys D series contactor LC1D12P7

Wishlist
Compare
Send
- VK
- WhatsApp
- Odnoklassniki
- Copy link

Model: 004.001.081

Manufacturer: Schneider Electric

Barcode: 3389110349306

Contactor LC1D12P7 is mainly used in AC circuits 50Hz (60Hz), rated voltage up to 660V, current up to 12A for controlling motors operation in AC-3 and AC-1.
Coil voltage 230VAC 50/60Hz.
Operating temperature -5°C…+60°C.

☎ Price by call

Main

range	TeSys
product name	TeSys D
product or component type	Contactor
device short name	LC1D
contactor application	Resistive load Motor control
utilisation category	AC-3 AC-1 AC-4
poles description	3P
power pole contact composition	3 NO
[Ue] rated operational voltage	Power circuit: ≤ 690 V AC 25...400 Hz Power circuit: ≤ 300 V DC
[Ie] rated operational current	25 A (at < 60 °C) at ≤ 440 V AC AC-1 for power circuit 12 A (at < 60 °C) at ≤ 440 V AC AC-3 for power circuit
motor power kW	3 kW at 220...230 V AC 50/60 Hz (AC-3) 5.5 kW at 380...400 V AC 50/60 Hz (AC-3) 5.5 kW at 415...440 V AC 50/60 Hz (AC-3) 7.5 kW at 500 V AC 50/60 Hz (AC-3) 7.5 kW at 660...690 V AC 50/60 Hz (AC-3) 3.7 kW at 400 V AC 50/60 Hz (AC-4)
motor power HP (UL / CSA)	0.5 hp at 115 V AC 50/60 Hz for 1 phase motors 2 hp at 230/240 V AC 50/60 Hz for 1 phase motors 3 hp at 200/208 V AC 50/60 Hz for 3 phases motors 3 hp at 230/240 V AC 50/60 Hz for 3 phases motors 7.5 hp at 460/480 V AC 50/60 Hz for 3 phases motors 10 hp at 575/600 V AC 50/60 Hz for 3 phases motors
control circuit type	AC at 50/60 Hz
[Uc] control circuit voltage	230 V AC 50/60 Hz
auxiliary contact composition	1 NO + 1 NC
[Uimp] rated impulse withstand voltage	6 kV conforming to IEC 60947
overvoltage category	III
[Ith] conventional free air thermal current	25 A (at 60 °C) for power circuit 10 A (at 60 °C) for signalling circuit
Irms rated making capacity	250 A at 440 V for power circuit conforming to IEC 60947 140 A AC for signalling circuit conforming to IEC 60947-5-1 250 A DC for signalling circuit conforming to IEC 60947-5-1
rated breaking capacity	250 A at 440 V for power circuit conforming to IEC 60947
[Icw] rated short-time withstand current	105 A 40 °C - 10 s for power circuit 210 A 40 °C - 1 s for power circuit 30 A 40 °C - 10 min for power circuit 61 A 40 °C - 1 min for power circuit 100 A - 1 s for signalling circuit 120 A - 500 ms for signalling circuit 140 A - 100 ms for signalling circuit
associated fuse rating	10 A gG for signalling circuit conforming to IEC 60947-5-1 40 A gG at ≤ 690 V coordination type 1 for power circuit 25 A gG at ≤ 690 V coordination type 2 for power circuit
average impedance	2.5 mOhm - Ith 25 A 50 Hz for power circuit
[Ui] rated insulation voltage	Power circuit: 690 V conforming to IEC 60947-4-1 Power circuit: 600 V CSA certified Power circuit: 600 V UL certified Signalling circuit: 690 V conforming to IEC 60947-1 Signalling circuit: 600 V CSA certified Signalling circuit: 600 V UL certified
electrical durability	2 Mcycles 12 A AC-3 at Ue ≤ 440 V 0.8 Mcycles 25 A AC-1 at Ue ≤ 440 V
power dissipation per pole	0.36 W AC-3 1.56 W AC-1
Front cover	With
mounting support	Rail Plate
standards	CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
product certifications	CSA GOST BV RINA DNV LROS (Lloyds register of shipping) GL CCC UL
connections - terminals	Power circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end Power circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end Power circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end Power circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end Power circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end Power circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
tightening torque	Power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm Power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2
operating time	12...22 ms closing 4...19 ms opening
safety reliability level	B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
mechanical durability	15 Mcycles
maximum operating rate	3600 cyc/h 60 °C

Complementary

coil technology	Without built-in suppressor module
control circuit voltage limits	0.3...0.6 Uc (-40…70 °C):drop-out AC 50/60 Hz 0.8...1.1 Uc (-40…60 °C):operational AC 50 Hz 0.85...1.1 Uc (-40…60 °C):operational AC 60 Hz 1...1.1 Uc (60…70 °C):operational AC 50/60 Hz
inrush power in VA	70 VA 60 Hz cos phi 0.75 (at 20 °C) 70 VA 50 Hz cos phi 0.75 (at 20 °C)
hold-in power consumption in VA	7.5 VA 60 Hz cos phi 0.3 (at 20 °C) 7 VA 50 Hz cos phi 0.3 (at 20 °C)
heat dissipation	2…3 W at 50/60 Hz
auxiliary contacts type	type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 type mirror contact 1 NC conforming to IEC 60947-4-1
signalling circuit frequency	25...400 Hz
minimum switching current	5 mA for signalling circuit
minimum switching voltage	17 V for signalling circuit
non-overlap time	1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
insulation resistance	> 10 MOhm for signalling circuit

Environment

IP degree of protection	IP20 front face conforming to IEC 60529
protective treatment	TH conforming to IEC 60068-2-30
pollution degree	3
ambient air temperature for operation	-40…60 °C 60…70 °C with derating
ambient air temperature for storage	-60…80 °C
operating altitude	0...3000 m
fire resistance	850 °C conforming to IEC 60695-2-1
flame retardance	V1 conforming to UL 94
mechanical robustness	Vibrations contactor open: 2 Gn, 5...300 Hz Vibrations contactor closed: 4 Gn, 5...300 Hz Shocks contactor open: 10 Gn for 11 ms Shocks contactor closed: 15 Gn for 11 ms
height	77 mm
width	45 mm
depth	86 mm
net weight	0.325 kg

Dimensions and internal circuit

3-pole contactors LC1D with coil 230Vac 50/60Hz

Model	Rated operational voltage AC-3 (Ue ≤ 400V), A	Standard power ratings of 3-phase motors 50-60 Hz in category AC-3 (t≤60°C), kW
Model	Rated operational voltage AC-3 (Ue ≤ 400V), A	220V/230V	380V/400V	415V	440V	500V	660V/690V	1000V
LC1D09P7	9	2,2	4	4	4	5,5	5,5	-
LC1D12P7	12	3	5,5	5,5	5,5	7,5	7,5	-
LC1D18P7	18	4	7,5	9	9	10	10	-
LC1D25P7	25	5,5	11	11	11	15	15	-
LC1D32P7	32	7,5	15	15	15	18,5	18,5	-
LC1D38P7	38	9	18,5	18,5	18,5	18,5	18,5	-
LC1D40AP7	40	11	18,5	22	22	22	30	22
LC1D50AP7	50	15	22	25	30	30	33	30
LC1D65AP7	65	18,5	30	37	37	37	37	37
LC1D80P7	80	22	37	45	45	55	45	45
LC1D95P7	95	25	45	45	45	55	45	45
LC1D115P7	115	30	55	59	59	75	80	75
LC1D150P7	150	40	75	80	80	90	100	90

Standard control circuit voltages on 42Vac 50/60Hz

a.c. supply
Voltage, V	24	42	48	110	115	220	230	240	380	400	415	440	500
LC1-D09..D150 (D115 and D150 coils with integral suppression device fitted as standard)
50/60Hz	B7	D7	E7	F7	FE7	M7	P7	U7	Q7	V7	N7	R7	-
LC1-D40...D115
50Hz	B5	D5	E5	F5	FE5	M5	P5	U5	Q5	V5	N5	R5	S5
60Hz	B6	-	E6	F6	-	M6	-	U6	Q6	-	-	R6	-
d.c. supply
Voltage, V	12	24	36	48	60	72	110	125	220	250	440
LC1-D09...D38 (coils with integral suppression device fitted as standard)
U 0,7…1,25 Uc	JD	BD	CD	ED	ND	SD	FD	GD	MD	UD	RD
LC1-D40...D95
U 0,85…1,1 Uc	JD	BD	CD	ED	ND	SD	FD	GD	MD	UD	RD
U 0,75…1,2 Uc	JW	BW	CW	EW	-	SW	FW	-	MW	-	-
LC1-D115 and D150 (coils with integral suppression device fitted as standard)
U 0,75…1,2 Uc	-	BD	-	ED	ND	SD	FD	GD	MD	UD	RD
Low consumption
Volatage DC	5	12	20	24	48	110	220	250
LC1-D09..D38 (coils with integral suppression device fitted as standard)
U 0,7...1,25 Uc	AL	JL	ZL	BL	EL	FL	ML	UL